1100° Moldatherm® Box Furnaces, Temperature Range 100°C to 1100°C

Crucibles: These furnaces are designed for use with a variety of crucibles including alumina, mullite, quartz and metallic. For information on crucibles contact your crucible supplier or call your Lindberg/Blue M sales representative. (Crucible not supplied with furnaces.)

Notes:

• Power cord and interconnecting wiring supplied by customer.
• Maximum weight capacity is 0.5 pounds per square inch of interior floor surface.
• Actual performance may vary depending on load, chamber size, sample placement, ambient temperature and environmental conditions.

Controllers

1200°C Digital, Single Setpoint Controller
Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor-based PID control (proportional, integral, derivative), single segment, single setpoint, 1 ramp to setpoint. Built-in adjustable high limit overtemperature protection. Simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in either °C or °F.

1200°C Digital Single Program, Multiple Segment Programmable Controller
Control console is fully wired and includes advanced microprocessor-based digital control, a solid-state power module, on/off circuit breaker and thermocouple input jack. Includes microprocessor-based PID control (proportional, integral, derivative), single program with multiple segments for ramp (up and down) and dwell (timed hold) temperature control. Built-in adjustable high limit overtemperature protection. Simultaneous LED display of actual temperature vs. setpoint. May be configured to display temperature in either °C or °F.

Option B Overtemperature Control (OTC)
Adjustable digital overtemperature control, factory installed on selected control consoles with "B" designation; see chart. Protects furnace and load in the event of primary control circuit failure. Overrides main controller, assumes temperature control and shuts off power to furnace if high limit is reached. Manual re-set required for safety. Operates via magnetic contacts through signal from independent thermocouple.

Optional RS485 Digital Communications Port
RS485 Digital communications port available as an option. Allows controller to be connected to a PC for remote monitoring and control of the furnace. Up to 30 units can be connected to one PC.

Heat-Up/Cool-Down Rates

Click for larger image Model CF56622C Heat-Up/Cool-Down, No Load